We want our kitchens to last a lot of years

More than 60 years experience

slide_santos-historia-origenes-antonio-santosOur history
Today at Santos, as from the very first day, each project is a challenge. A challenge where we must respond to the trust placed in us with a flawless product that is able to surprise and exceed all the user’s expectations. This is our story, which has helped us get this far.

1952 — The beginnings

slide_santos-historia-jose-santos José Santos, following his father’s footsteps, opened up a carpentry workshop very near Santiago de Compostela.

1960s and 1970s — The first kitchen cupboards

In the 1960s the first kitchen cupboards were produced. Due to this product specialisation we expanded our facilities and we improved the production system directing it towards kitchen manufacturing. In the 1970s the manufacturing of independent units began and the monoblock cupboards from previous decades were abandoned.

The 1980s — Facilities are expanded

slide_santos-historia-1980-1 The production facilities expanded substantially in these years and new machinery was purchased.
White striped / ash tree NIROS

The 1980s — Facilities are expanded

slide_santos-historia-1980-2 In addition, the manufacturing of wooden fronts was incorporated.
Painted light Oak DEVILLE

The 1990s — Our fronts evolve

slide_santos-historia-1990 Our fronts evolved. More finishes were offered including lacquer (textured, matt silk and gloss) as well as more laminates and melamine finishes with different combinations of edges. The MYTHOS model appeared, the first version of a front without a handle; this was an important innovation thanks to the purity of its lines.
Lacquered HG red MYTHOS

1995 — Function block

slide_santos-historia-1995 Concern focused on planning the kitchen area according to its functions. The “function block” concept became the benchmark for kitchen architecture. This system involved the development of new worktops, which varied in thickness, edges and materials, depending on the area for which they were intended (Granitop, steel worktops and frames, anti-drip edges, etc).
Antique white / natural beech OMNIA

1997 — Facilities are expanded

slide_santos-historia-1997 Our facilities expanded again, doubling the available manufacturing surface. From this year onwards, important investments are made to incorporate industrial equipment.
Cognac Maple SHAKER

1999 — Interior design

This is the starting point for a better organisation of the interior of the units. A new concept of interior design was introduced: kitchens were designed with drawers in the base units, avoiding the use of doors which restrict access to the interior of the cupboard.
Cognac Maple MARINA

2001 — Optimising spaces

slide_santos-historia-2001 Storage space was optimised by promoting horizontal projection in the base units and incorporating drawers up to 120 cm wide and 65 cm deep. All of the dimensions of the units changed both in height and depth. The height of base units was fixed at 72 cm to achieve a better use of the interior, while depths reached up to 70 cm.

2004 — Minos Series

slide_santos-historia-2004 We focused on the search for more resistant materials which could be used in the kitchen as well as smooth, plain fronts which make cleaning easier and have a sleek and functional aesthetic design. The MINOS model was born, an evolution of the MYTHOS model with no handles, incorporating several improvements and combining it with steel, which reappeared with force in fronts, worktops, frames and wall panels.
Pearl white lacquered MINOS

2007 — Santos’ standard

Solutions designed to optimise the kitchen’s storage capacity were incorporated. 30, 40 and 60 cm deep drawers were introduced, and the latter became the new Santos standard. Base units with a height of 81 cm were also introduced, which allowed for a better use of the interior of the units. New industrial investments enabled increased capacity and flexibility in the manufacturing of components.
Sand melamine MINOS-E

2009 — Collection 2009

slide_santos-historia-2009 Santos introduces the Assisted Opening System (SAA) that allows users to open drawers effortlessly whilst maintaining the storage capacity. An innovative solution is introduced for integrating extractor hoods which not only leads to a better use of space and the incorporation of a lighting system in the work area, but also contributes to a more aesthetically unified wall area of the kitchen.
Laminated stone grey PLANO

2011 — Collection 2011

slide_santos-historia-2011-1 New constructive improvements for units are introduced. Other highlights are drawers in pearl white and the assisted opening system for wall units (SAA-P): with a gentle push the door will open automatically and will return to its original position, without any effort, by simply pressing the close button.
Lacquered white KARMEL

2011 — Collection 2011

slide_santos-historia-2011-2 The coplanar sliding door system is also introduced which permits greater visibility and easier access to the interior of the unit. Once they are closed, the doors line up perfectly. Interior accessories in wood are developed respecting their natural beauty.

2012 — Collection 2012

slide_santos-historia-2012The total absence of a handle is one of the main characteristics of the Intra model. Santos has developed an innovative opening system where the units’ profile is adapted so it acts as a handle.
INTRA-L snow white

Why Santos?

Some reasons for trusting us




Designed to help you




Ideas that will help you choose your kitchen



close slider